Skip to Navigation Skip to Content

SITE SEARCH

FIND A LOCAL UK BIKE SHOP

Show shops within miles of

Re: Cycle Comfort

28 January, 2014 10:46PM
Hi Steve,
You have made some comparisons between 700c and 26" wheels. You can only really compare them directly if the tyres are the same and the effective gear ratios are the same.

I've been using 700c wheels on both hybrids and a touring bike for over thirty years now. I generally use tyres which are either 35 mm wide or 38 mm wide with a moderate tread (no knobbly bits). By selecting the right gear I can cycle up quite steep hills without too much problem without even standing on the pedals (1 in 5 is my limit though that is a bit of an effort). Elsewhere on this site (near top left of the page) there is a 'Gear Calculator' which enables you to determine the actual gearing which your bike has.

Do you actually use all your gears? If you don't use the top two or three gears then it might be worth considering getting smaller chainrings which will give you lower gears for hill climbing while keeping your usable top gears.

- Murray
Subject Author Posted

Cycle Comfort

Steve 25 January, 2014 09:33PM

Re: Cycle Comfort

DocB 26 January, 2014 08:16AM

Re: Cycle Comfort

Steve 26 January, 2014 06:14PM

Re: Cycle Comfort

DocB 26 January, 2014 06:51PM

Re: Cycle Comfort

Steve 27 January, 2014 03:33PM

Re: Cycle Comfort

DocB 27 January, 2014 04:05PM

Re: Cycle Comfort

Murray R Langton 28 January, 2014 10:46PM

Re: Cycle Comfort

Steve 29 January, 2014 09:05PM

Re: Cycle Comfort

DocB 30 January, 2014 07:37AM

Re: Cycle Comfort

Steve 30 January, 2014 03:31PM



Author:

Your Email:


Subject:


Message:
Sitemap | Privacy Policy | Terms & Conditions
WhyCycle and all content is ©Copyright SiWIS 2001-2014 except where stated.